Good day
Upper tailgate not opening
Did strip and check - actuator 100%
Door switch also 100%
Hard reboot did not help
Holding lock and unlock did not help
Broken wire? How to trace?
Could anyone advise how I get to FET G170, which I see on the wiring diagram, but cannot locate
Any advice would be much appreciated
Disco3 TDV6 2009 Upper Tailgate
-
- Forum Contributor
- Posts: 2
- Joined: Mon Apr 02, 2018 1:41 pm
- Car Details: 2009 Disco 3
- PillowSmuggler
- Committee Member
- Posts: 7587
- Joined: Wed Apr 07, 2010 8:17 am
- Winner: Avatar of the Year 2012
Comedian of the Year 2013
Mechanic of the Year 2014
Clube Member of the Year 2014 - Car Details: Disco3 TDV6 HSE 2007
- Member Since: 29 Jun 2013
- Location: http://goo.gl/maps/WGOsq
Re: Disco3 TDV6 2009 Upper Tailgate
If that FET relates to a Field Effect Transistor (an electronic version of a relay with no moving parts for those who don't know) then it's almost certainly a part of the the CJB itself which is a bit of a nightmare to check over as it has a lot of plugs/cables feeding into it.
Just to start at the obvious, but you haven't mentioned checking the fuse; I assume you have done that?
Just to start at the obvious, but you haven't mentioned checking the fuse; I assume you have done that?
Regards, Dom.
2007 HSE Auto TDV6
Snorkel, Cyclonic air filter, GNVP Rock Sliders
78Ah Aux, Split charge, FBH Timer/Remote, Mantec sump plate
LED: Strobes, interior, camping, brake, running, sides
New Oil Pump, using 2SO at 1:400.
2007 HSE Auto TDV6
Snorkel, Cyclonic air filter, GNVP Rock Sliders
78Ah Aux, Split charge, FBH Timer/Remote, Mantec sump plate
LED: Strobes, interior, camping, brake, running, sides
New Oil Pump, using 2SO at 1:400.
-
- Forum Contributor
- Posts: 2
- Joined: Mon Apr 02, 2018 1:41 pm
- Car Details: 2009 Disco 3
Re: Disco3 TDV6 2009 Upper Tailgate
Thanks for feedback
There is apparently no fuse for upper tailgate.
I'll start stripping out the junction box on passenger side
Landy work weekend it is
Regards
Brian
There is apparently no fuse for upper tailgate.
I'll start stripping out the junction box on passenger side
Landy work weekend it is
Regards
Brian