Tent pole + LED light...
- Bodsy
- Chairman
- Posts: 12224
- Joined: Mon Feb 15, 2010 1:37 pm
- Winner: Technical Post 2012, 2013
Comedian of the Year 2014 - Car Details: 2007 HSE
- Member Since: 15 Feb 2010
- Location: Sunny Shropshire!
Re: Tent pole + LED light...
you're only likely to be using them when parked up with engine off, so 12,6v probably. Your solar panel with it's controller should be similar (but check the controller output band)
Check http://tinyurl.com/brakebible
Here for How to change your Brake Pads, Disks, EPB Shoes Adjust, removal, cleaning & fitting Guide.
IID Pro Multivehicle. D3, D4, RRSport pre and post 2010, FFRR.
Gearbox Transmission Flushes and much more
Disco3Club Chairman
Here for How to change your Brake Pads, Disks, EPB Shoes Adjust, removal, cleaning & fitting Guide.
IID Pro Multivehicle. D3, D4, RRSport pre and post 2010, FFRR.
Gearbox Transmission Flushes and much more
Disco3Club Chairman
- anglefire
- Site Admin
- Posts: 19327
- Joined: Sat May 15, 2010 8:01 pm
- Winner: Club Member of Year 2012 & 13
- Car Details: Skoda Enyaq IV 80
- Member Since: 17 May 2010
- Location: Solihull, West Midlands
- Contact:
Re: Tent pole + LED light...
But you are unlikely to have the lights on (except work lights I guess) when the sun is out.
Mark
Waeco CFX 40
1977 Triumph Spitfire 1500
Skoda Enyaq IV 80
Skoda Superb SE L Ex (Gone)
2006 disco3 SE. Gone but not forgotten.
BMW 530d M Sport Touring. Gone
Member of Admin team and
Disco3Club Photos: Here
Waeco CFX 40
1977 Triumph Spitfire 1500
Skoda Enyaq IV 80
Skoda Superb SE L Ex (Gone)
2006 disco3 SE. Gone but not forgotten.
BMW 530d M Sport Touring. Gone
Member of Admin team and
Disco3Club Photos: Here
- Bodsy
- Chairman
- Posts: 12224
- Joined: Mon Feb 15, 2010 1:37 pm
- Winner: Technical Post 2012, 2013
Comedian of the Year 2014 - Car Details: 2007 HSE
- Member Since: 15 Feb 2010
- Location: Sunny Shropshire!
Re: Tent pole + LED light...
fair point.
I might have just ordered 50 of them........
I might have just ordered 50 of them........
Check http://tinyurl.com/brakebible
Here for How to change your Brake Pads, Disks, EPB Shoes Adjust, removal, cleaning & fitting Guide.
IID Pro Multivehicle. D3, D4, RRSport pre and post 2010, FFRR.
Gearbox Transmission Flushes and much more
Disco3Club Chairman
Here for How to change your Brake Pads, Disks, EPB Shoes Adjust, removal, cleaning & fitting Guide.
IID Pro Multivehicle. D3, D4, RRSport pre and post 2010, FFRR.
Gearbox Transmission Flushes and much more
Disco3Club Chairman
- PillowSmuggler
- Committee Member
- Posts: 7587
- Joined: Wed Apr 07, 2010 8:17 am
- Winner: Avatar of the Year 2012
Comedian of the Year 2013
Mechanic of the Year 2014
Clube Member of the Year 2014 - Car Details: Disco3 TDV6 HSE 2007
- Member Since: 29 Jun 2013
- Location: http://goo.gl/maps/WGOsq
Re: Tent pole + LED light...
To be honest, I really don't know! It depends on the led chips as to how well they survive the excess volts. Some will be fine, others will smoke quickly. If the heat is taken away through the back plate then it'll be better too. And it's possible there's a driver on board built in, though usually they state something like 10 to 36v if they have that built in. If you use them without the engine running you'll probably be ok, it's when the engine is running that the volts could climb too high for some...JF Lux wrote:so should i have ordered these as well...???PillowSmuggler wrote:I'll order some drivers,
Regards, Dom.
2007 HSE Auto TDV6
Snorkel, Cyclonic air filter, GNVP Rock Sliders
78Ah Aux, Split charge, FBH Timer/Remote, Mantec sump plate
LED: Strobes, interior, camping, brake, running, sides
New Oil Pump, using 2SO at 1:400.
2007 HSE Auto TDV6
Snorkel, Cyclonic air filter, GNVP Rock Sliders
78Ah Aux, Split charge, FBH Timer/Remote, Mantec sump plate
LED: Strobes, interior, camping, brake, running, sides
New Oil Pump, using 2SO at 1:400.
- PillowSmuggler
- Committee Member
- Posts: 7587
- Joined: Wed Apr 07, 2010 8:17 am
- Winner: Avatar of the Year 2012
Comedian of the Year 2013
Mechanic of the Year 2014
Clube Member of the Year 2014 - Car Details: Disco3 TDV6 HSE 2007
- Member Since: 29 Jun 2013
- Location: http://goo.gl/maps/WGOsq
Re: Tent pole + LED light...
Ahh yes, based on Stu's advice that you need bell wire for high current applications like winches so the electricity is forced to go faster in the smaller gap like water, leds can be protected by using 32mm welding wire so the electric moves nice and slow.
Regards, Dom.
2007 HSE Auto TDV6
Snorkel, Cyclonic air filter, GNVP Rock Sliders
78Ah Aux, Split charge, FBH Timer/Remote, Mantec sump plate
LED: Strobes, interior, camping, brake, running, sides
New Oil Pump, using 2SO at 1:400.
2007 HSE Auto TDV6
Snorkel, Cyclonic air filter, GNVP Rock Sliders
78Ah Aux, Split charge, FBH Timer/Remote, Mantec sump plate
LED: Strobes, interior, camping, brake, running, sides
New Oil Pump, using 2SO at 1:400.
- Stu
- Vice Chairman
- Posts: 20241
- Joined: Sun Feb 07, 2010 10:00 am
- Winner: Subject of Photo of the Year 2012
Most Stupid Fall of the year - so far. 2013
Avatar of the Year 2014
Author the Funniest Thread of the Year 2014 - Car Details: D3 HSE
- Member Since: 07 Feb 2010
- Contact:
Re: Tent pole + LED light...
If you want to really slow it down then whack some fuses and relays in there, they always delay things.Ahh yes, based on Stu's advice that you need bell wire for high current applications like winches so the electricity is forced to go faster in the smaller gap like water, leds can be protected by using 32mm welding wire so the electric moves nice and slow.
If you make sure your wire is twists as well then that causes the electricery to go dizzy and it has to move slower.
As featured in LRO and BBC Radio 2!
"It's not a gazebo it's an event shelter"
"It's not a gazebo it's an event shelter"
-
- Forum Contributor
- Posts: 11127
- Joined: Sun Apr 18, 2010 8:58 pm
- Car Details: The old muddy banger
- Location: Can't make my mind up!! :-)
Re: Tent pole + LED light...
Stu advocating the use of fuses? Have I entered an alternate universe?
If only I could think of something useful to type here!!
- PillowSmuggler
- Committee Member
- Posts: 7587
- Joined: Wed Apr 07, 2010 8:17 am
- Winner: Avatar of the Year 2012
Comedian of the Year 2013
Mechanic of the Year 2014
Clube Member of the Year 2014 - Car Details: Disco3 TDV6 HSE 2007
- Member Since: 29 Jun 2013
- Location: http://goo.gl/maps/WGOsq
Re: Tent pole + LED light...
Worry not Del, Stu is merely advising what to do to slow down the electrical imps so they can't burn out the new lights
Regards, Dom.
2007 HSE Auto TDV6
Snorkel, Cyclonic air filter, GNVP Rock Sliders
78Ah Aux, Split charge, FBH Timer/Remote, Mantec sump plate
LED: Strobes, interior, camping, brake, running, sides
New Oil Pump, using 2SO at 1:400.
2007 HSE Auto TDV6
Snorkel, Cyclonic air filter, GNVP Rock Sliders
78Ah Aux, Split charge, FBH Timer/Remote, Mantec sump plate
LED: Strobes, interior, camping, brake, running, sides
New Oil Pump, using 2SO at 1:400.