A lot cheaper than I remember, assuming these are the ones...
http://www.ebay.co.uk/itm/221032462305" onclick="window.open(this.href);return false;
Allisports off road intercooler
- Dave_Harris
- Forum Contributor
- Posts: 1569
- Joined: Mon Oct 15, 2012 11:28 am
- Car Details: 2011, 3.0 D4 HSE
- Location: Newport Pagnell, Milton Keynes
- CDS
- Secretary
- Posts: 4818
- Joined: Wed Sep 22, 2010 5:09 pm
- Car Details: Tangerine Machine
- Location: Most of the UK
- Contact:
Re: Allisports off road intercooler
I considered these before I put the Alisport Off Road intercooler on the G4, the issue for me is the fact that you haveto hack off the inner portion of the crash bar mounts, which isn't that smart really, and is a non starter if you have a winch as they are the main bolt on point for the tray brackets
Imagine a world with no hypothetical situations..........
- anglefire
- Site Admin
- Posts: 19327
- Joined: Sat May 15, 2010 8:01 pm
- Winner: Club Member of Year 2012 & 13
- Car Details: Skoda Enyaq IV 80
- Member Since: 17 May 2010
- Location: Solihull, West Midlands
- Contact:
Re: Allisports off road intercooler
And it mounts very low - fine for a road car, but I prefer the higher position of the allisport off road version - but each to thier own
Mark
Waeco CFX 40
1977 Triumph Spitfire 1500
Skoda Enyaq IV 80
Skoda Superb SE L Ex (Gone)
2006 disco3 SE. Gone but not forgotten.
BMW 530d M Sport Touring. Gone
Member of Admin team and
Disco3Club Photos: Here
Waeco CFX 40
1977 Triumph Spitfire 1500
Skoda Enyaq IV 80
Skoda Superb SE L Ex (Gone)
2006 disco3 SE. Gone but not forgotten.
BMW 530d M Sport Touring. Gone
Member of Admin team and
Disco3Club Photos: Here
Re: Allisports off road intercooler
I'm writing and I loose the text, sumarizing:
- It is this one from ebay
- there are no option for a higher position due to piping inlet and outlet.
- If anyone wants a higher position for offroad or winch integration, take care with the condensator from the cooling system radiator.
- For the front beam suports, I only cut 1 of the 4 bolts positions on each side and 2cm of the plate, then you have 75% of support position available.
Regards
- It is this one from ebay
- there are no option for a higher position due to piping inlet and outlet.
- If anyone wants a higher position for offroad or winch integration, take care with the condensator from the cooling system radiator.
- For the front beam suports, I only cut 1 of the 4 bolts positions on each side and 2cm of the plate, then you have 75% of support position available.
Regards
A man with a new idea is a crank-until he succeeds..... (Mark Twain)