Disco3Club Discovery

G4 Expedition Drawer Build


Projects and discussions on ‘how to’ and your Discovery 3 and 4

Re: G4 Expedition Drawer Build

Postby PillowSmuggler » Mon Jul 31, 2017 9:25 am

That roll of paper's a hell of a long reach from where the bumper dumper would be fitted isn't it? :shark:

Fantastic write up Clive; shame about the gin tank under the commercial floor though.
Just a thought - those tanks are often heat formed - if you half filled it with boiling water could you fit it under the floor and weight it with sand bags/big blokes until it conformed to
the shape? You might lose a bit of capacity but...?
Regards, Dom.
2007 HSE Auto TDV6
Snorkel, Cyclonic air filter, Stebel Nautilus, GNVP Rock Sliders
78Ah Aux, Split charge, FBH Timer/Remote, Mantec sump plate
LED: Strobes, interior, camping, brake, running, sides
New Oil Pump, 2SO at 1:400.
User avatar
PillowSmuggler
Committee Member
 
Posts: 7444
Joined: Wed Apr 07, 2010 8:17 am
Location: http://goo.gl/maps/WGOsq
Winner: Avatar of the Year 2012
Comedian of the Year 2013
Technical Post of the Year 2014
Club Member of the Year 2014
Car Details: Disco3 TDV6 HSE 2007

Re: G4 Expedition Drawer Build

Postby CDS » Tue Aug 01, 2017 11:13 pm

Hmmmmmm......you might be onto something there Dom :thumbright:
I might struggle to get enough boiling water in there and keep it hot enough for long enough using the kitchen kettle.....
Certainly easy enough to cool it to set it though....brim with cold water to cool the boiling water, pump out and refill with cold = job done :thumbright:
How to heat enough water.........?
Imagine a world with no hypothetical situations..........
User avatar
CDS
Elected Club Member
 
Posts: 4802
Joined: Wed Sep 22, 2010 5:09 pm
Location: Not Sure, ask Stu....
Car Details: Tangerine Machine

Re: G4 Expedition Drawer Build

Postby Bodsy » Wed Aug 02, 2017 8:57 am

surely you can use the in built water heater?
have one end connected to a bigger tank and the pump, have an outlet pipe so when it fills, it can go back to the hot water heater tank.

should get hot enough. Although not sure 100% if the tank will deform as its structure is coarse plastic I think.
Have some strong rubber under the tank so it doesnt get piecerd by anything.
Check http://tinyurl.com/brakebible
Here for How to change your Brake Pads, Disks, EPB Shoes Adjust, removal, cleaning & fitting Guide.

FaultMate MSV2 - Multi-Vehicle (D3, D4, RRS Pre 2010)
IID Pro Multivehicle. D3, D4, RRSport pre and post 2010, FFRR.

Disco3Club Vice-Chairman
User avatar
Bodsy
Chairman
 
Posts: 11929
Joined: Mon Feb 15, 2010 2:37 pm
Location: Sunny Shropshire!
Winner: Technical Post 2012, 2013
Comedian of the Year 2014
Car Details: 2007 HSE
Member Since: 15 Feb 2010

Re: G4 Expedition Drawer Build

Postby CDS » Wed Aug 02, 2017 9:06 pm

I considered the built in water heater but a) I don't think it'll get hot enough and b) the whole unit needs to come out to get the front part of the commercial floor out to get the water tank in place.....therefore it's a right bloody faff to reconnect everything with it hanging off the tailgate in pieces :lol:
I have found a 15litre pan in the kitchen cupboard though....so I thought I'd fill 3 kettles and 4 smaller pans and the huge pan, once it's all boiling then operation melt can commence :thumbright:
Imagine a world with no hypothetical situations..........
User avatar
CDS
Elected Club Member
 
Posts: 4802
Joined: Wed Sep 22, 2010 5:09 pm
Location: Not Sure, ask Stu....
Car Details: Tangerine Machine

Re: G4 Expedition Drawer Build

Postby DSL » Wed Aug 02, 2017 9:24 pm

Slight upgrade to normal rules. No vid = didn't happen. :whistle:
If only I could think of something useful to type here!! :(
DSL
Elected Club Member
 
Posts: 11004
Joined: Sun Apr 18, 2010 8:58 pm
Location: Can't make my mind up!! :-)
Car Details: The old muddy banger

Previous

Return to Projects

Who is online

Users browsing this forum: No registered users and 1 guest

 

 

 

Copyright © Disco3Club - All rights reserved

 

Design by Fife Web Solutions

 

Powered by phpBB