EPB is in bits, on one side the whole had slipped out of position (leaving me lblocking a main route out of York a few weeks ago as it locked on!).
Quick question as I reassemble, the Adjuster has 2 bits as below but given there is a thread inside surely there is another bit missing? Or is the adjuster just these 2 bits. PHotos suggest it is ok but don't see how it adjusts if there is nothing to push/screw against - why a thread if nothing there. Googling images doesn't show anything but appreciate confimration before I try and reassemble.
Thanks
Tony
https://photos.app.goo.gl/PSLXirNuusDYtSrLA
https://photos.app.goo.gl/LcCeeeLgTWHxqn33A
Apols for thr link, can't get images to work.
Thanks.
Help EPB adjuster missing a bit?
- ruggedpeak
- Forum Contributor
- Posts: 1236
- Joined: Sun Oct 17, 2010 12:49 pm
- Car Details: D3 XS
- ruggedpeak
- Forum Contributor
- Posts: 1236
- Joined: Sun Oct 17, 2010 12:49 pm
- Car Details: D3 XS
Re: Help EPB adjuster missing a bit?
Dismantled the other side. now realised that the short end had completely seized so it would not turn.
Tony
56 D3 XS
56 D3 XS