I'm sure mine was accessible with a socket extension?
Probably at least 6" from memory
Sent from my iPhone using Tapatalk Pro
Suspention pump
- Dave_Harris
- Forum Contributor
- Posts: 1569
- Joined: Mon Oct 15, 2012 11:28 am
- Car Details: 2011, 3.0 D4 HSE
- Location: Newport Pagnell, Milton Keynes
Re: Suspention pump
I got a universal joint for the socket & got it on within minutes .
I never noticed before (as I haven't had it long) but is it normal for the pump to operate for a while every time the ignition is started whether it needs lifting or not?
I took it down the road for a test & then parked it on a nice level carpark. Looking at the 4x4 bit on screen, it seemed that the left of the car was ever so slightly lower than the right so I got out & looked. The picture of the screen didn't come out but here are the outside pics.
Left Right Clearly different
What should the distance be between the hub centre & the under arch?
When I had a D2 I cut measured blocks to place between the axle & chassis to calibrate it. What size blocks do I need to cut for this one? or is there another method?
domedit:fixed inline image
I never noticed before (as I haven't had it long) but is it normal for the pump to operate for a while every time the ignition is started whether it needs lifting or not?
I took it down the road for a test & then parked it on a nice level carpark. Looking at the 4x4 bit on screen, it seemed that the left of the car was ever so slightly lower than the right so I got out & looked. The picture of the screen didn't come out but here are the outside pics.
Left Right Clearly different
What should the distance be between the hub centre & the under arch?
When I had a D2 I cut measured blocks to place between the axle & chassis to calibrate it. What size blocks do I need to cut for this one? or is there another method?
domedit:fixed inline image
- anglefire
- Site Admin
- Posts: 19327
- Joined: Sat May 15, 2010 8:01 pm
- Winner: Club Member of Year 2012 & 13
- Car Details: Skoda Enyaq IV 80
- Member Since: 17 May 2010
- Location: Solihull, West Midlands
- Contact:
Re: Suspention pump
Yes its not unusual to run on first start up - but shouldn't run for long. Just tops up the pressure in the system.
As for the height, does look wrong. Needs calibrating - the easiest way is to use an IID tool as its latest algorithm makes it very simple to do. Other tools can do it, but can be a bit of a black art depending on the system.
As for the height, does look wrong. Needs calibrating - the easiest way is to use an IID tool as its latest algorithm makes it very simple to do. Other tools can do it, but can be a bit of a black art depending on the system.
Mark
Waeco CFX 40
1977 Triumph Spitfire 1500
Skoda Enyaq IV 80
Skoda Superb SE L Ex (Gone)
2006 disco3 SE. Gone but not forgotten.
BMW 530d M Sport Touring. Gone
Member of Admin team and
Disco3Club Photos: Here
Waeco CFX 40
1977 Triumph Spitfire 1500
Skoda Enyaq IV 80
Skoda Superb SE L Ex (Gone)
2006 disco3 SE. Gone but not forgotten.
BMW 530d M Sport Touring. Gone
Member of Admin team and
Disco3Club Photos: Here
Re: Suspention pump
For those who may be interested for future reference, in standard ride height the front should be 466mm from the centre of the hub to the under side of the arch, and the rear should be 485mm.
Suspension Pump
Great article - I joined before but lost my email and password details so just re-joined.
I have already used Bodsy's guide for fixing the brakes on my G4 D3
The other D3 now has a regular suspension error - normal height only, no special settings available
The IID tool reports pump slow filling the reservoir - so either I have a leak or the pump is on its way out
will get the car into the garage and see what is going on - read the other post about huge amounts of dust possibly causing over heating, so another area to check
the repair kit looks comprehensive too :
https://www.ebay.co.uk/itm/282534764941
cheers
Robin
I have already used Bodsy's guide for fixing the brakes on my G4 D3
The other D3 now has a regular suspension error - normal height only, no special settings available
The IID tool reports pump slow filling the reservoir - so either I have a leak or the pump is on its way out
will get the car into the garage and see what is going on - read the other post about huge amounts of dust possibly causing over heating, so another area to check
the repair kit looks comprehensive too :
https://www.ebay.co.uk/itm/282534764941
cheers
Robin
- anglefire
- Site Admin
- Posts: 19327
- Joined: Sat May 15, 2010 8:01 pm
- Winner: Club Member of Year 2012 & 13
- Car Details: Skoda Enyaq IV 80
- Member Since: 17 May 2010
- Location: Solihull, West Midlands
- Contact:
Re: Suspention pump
Do you know your old username Robin? If you do I can always merge the accounts (well I think I can )
Mark
Waeco CFX 40
1977 Triumph Spitfire 1500
Skoda Enyaq IV 80
Skoda Superb SE L Ex (Gone)
2006 disco3 SE. Gone but not forgotten.
BMW 530d M Sport Touring. Gone
Member of Admin team and
Disco3Club Photos: Here
Waeco CFX 40
1977 Triumph Spitfire 1500
Skoda Enyaq IV 80
Skoda Superb SE L Ex (Gone)
2006 disco3 SE. Gone but not forgotten.
BMW 530d M Sport Touring. Gone
Member of Admin team and
Disco3Club Photos: Here