Allisports off road intercooler

Discounted group buys / bulk purchases
User avatar
Dave_Harris
Elected Club Member
Posts: 1567
Joined: Mon Oct 15, 2012 11:28 am
Car Details: 2011, 3.0 D4 HSE
Location: Newport Pagnell, Milton Keynes

Re: Allisports off road intercooler

Post by Dave_Harris » Sat Jun 07, 2014 10:29 am

A lot cheaper than I remember, assuming these are the ones...
http://www.ebay.co.uk/itm/221032462305" onclick="window.open(this.href);return false;



User avatar
CDS
Elected Club Member
Posts: 4804
Joined: Wed Sep 22, 2010 5:09 pm
Car Details: Tangerine Machine
Location: Not Sure, ask Stu....
Contact:

Re: Allisports off road intercooler

Post by CDS » Sat Jun 07, 2014 11:04 am

I considered these before I put the Alisport Off Road intercooler on the G4, the issue for me is the fact that you haveto hack off the inner portion of the crash bar mounts, which isn't that smart really, and is a non starter if you have a winch as they are the main bolt on point for the tray brackets :headbang:


Imagine a world with no hypothetical situations..........

User avatar
anglefire
Site Admin
Posts: 18644
Joined: Sat May 15, 2010 8:01 pm
Winner: Club Member of Year 2012 & 13
Car Details: BMW 530d M Sport
Member Since: 17 May 2010
Location: Solihull, West Midlands
Contact:

Re: Allisports off road intercooler

Post by anglefire » Sat Jun 07, 2014 1:59 pm

And it mounts very low - fine for a road car, but I prefer the higher position of the allisport off road version - but each to thier own :thumbright:


Mark

Waeco CFX 40
2006 disco3 SE. Gone but not forgotten.
Member of Admin team and :ugeek:
Disco3Club Photos: Here

User avatar
E-peich
Forum Contributor
Posts: 33
Joined: Sun Sep 12, 2010 9:55 pm
Location: Pamplona - Spain

Re: Allisports off road intercooler

Post by E-peich » Sat Jun 07, 2014 6:03 pm

I'm writing and I loose the text, sumarizing:
- It is this one from ebay
- there are no option for a higher position due to piping inlet and outlet.
- If anyone wants a higher position for offroad or winch integration, take care with the condensator from the cooling system radiator.

- For the front beam suports, I only cut 1 of the 4 bolts positions on each side and 2cm of the plate, then you have 75% of support position available.

Regards


A man with a new idea is a crank-until he succeeds..... (Mark Twain)

Post Reply